|
 Click here to download PDF of PT150 Heavy Duty Pan and Tilt - Sensor Positioner
 
This heavy duty pan and tilt feature a 150 pound payload capacity with an extremeley durable design. Our PT150 Pan Tilt Unit offers exceptional travel velocity and very high repeatability and resolution. Call us today for more details and information - 561-691-5959.
MECHANICAL ELECTRICAL Dimensions 14.0” (w) x 15.0” (h) x 10.0” (d) Voltage 24Vdc (Nominal) Weight 65 Lbs Power Contact Factory Base Dim’s 9.5” Diameter (18.0” w/Shock Mount) Heater Optional – Pre-wired Std Base Mounting Contact Factory Construction Aluminum and Stainless Steel OPERATIONAL Color Anodized or Painted & Stainless Steel Travel Velocity 60°/Sec.- .005°/Sec. Payload Capacity 150 Lbs - Balanced Resolution .00275° Drive Motor Brush DC Servo Repeatability .0055° Travel Range 360° Continuous @ Azimuth Accuracy .0055° 5° thru 270° Fully Adjustable @ Elevation Payload Inertia 8.6 ft-lb-sec2 (Az.), Holding Brake Mechanical w/Electrical Interlock 4.7 ft-lb-sec2 (Elev.) Tilt Limits: Electrical, Mechanical, Software Feedback: 17 Bit Gurley Encoder Backlash None (Azimuth & Elevation) COMMUNICATION OPTIONS Interface RS-422 or RS-232 Coatings (Finish) Motor Controller Microprocessor based Payload Mount Sensor Pass-Thru 16 Ea – 2 Amp, 8 Ea – 5 Amp, 3 Ea - Coax Heaters (Gyro & Heater Line NOT Included Above) Stabilization – MEMS Gyro (Two-Axis) Shock Mount ENVIRONMENTAL(MIL 810E) Operating Temperature: 501.00 Procedure II (1 Cycle @ 3 Hours Each -31.7° C and 51.7° C) Note: These Ranges Require Heater Blanket Humidity: 507.00 Procedure III (2 Cycles of 24 Hours @ 50° C and 100% Humidity) Salt Fog: 509.00 Procedure I (1 Cycle of 24 Hours @ 5% Sodium Chloride) Dust & Wind: 510.00 Procedure I (1 Cycle of 6 Hours) Vibration (514.4): Axis Frequency (Hz) Amplitude 30 Min/Axis All 2.7 to 5.5 1.0” DA 5.5 to 38 ± 1.5g 38 to 50 .002” DA 50 to 200 ± 2.5g Shock (516.4): 6± .6g’s, 11.0 ± 1.1 ms half sine wave applied in each direction of 3 mutually perpendicular axis. 20 ±2.0 g’s, 11.0 ± 1.1 ms half sine wave applied in each direction of 3 mutually perpendicular axis with Optional Shock Mount.
|
